BecomeSingers is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More
To keep that clean look on your desktop, it is good to have white studio monitors at hand.
If you are a minimalist, designing your studio for recording or your home office desk with white is an important aspect that will need most of your attention.
Choosing the right colors for your desk will complement the concept you want your room to express. In this article, we are going to check on good quality studio speakers that will perfectly supplement your working space.
White Studio Monitors Buyer’s Guide
Studio Monitors, which are also known as Workroom Monitors, are audio devices that are made as one of the essential parts of a studio room. The main difference between typical speakers and studio monitors is the accuracy of the sound that it produces.
If you are a music expert and you listen to the mixture of music your sound studio is creating, you will need to be as precise as possible about every sound you hear. Not being able to hear every sound accurately will affect your productivity. That is the reason why having the right Workroom monitors is extremely important.
Good Quality Studio/Workroom Monitors
Workroom monitors are key audio devices for different studio areas. These monitors are priced differently as some types may be more expensive than others, yet there are also many affordable monitors you can see online. It is still very possible for you to find some affordable monitors coming from famous brands.
Quality and affordability can come hand in hand as long as the devices you purchase come from a trusted brand. So, if you are looking for pocket-friendly monitors, then we will show you some reviews below to guide you on which equipment might fit your budget and want.
Active or Passive
One of the first choices you will have to make when buying a studio monitor is to choose whether you want a passive or active monitor. Passive monitors are more of an old-school monitor that requires you to connect your speakers with an amplifier and a crossover. Active monitors have that already built into them. This means that you will not have to carry around any extra gear, and you can be sure that the amplifier and speaker are well-matched.
Size
The size of your monitor should be based on the amount of space available to you. Smaller monitors are going to work better in small spaces. Remember, the point is not about how loud your monitor sounds, but rather how precisely you are able to hear your mix. The room you are in can change how you hear your mix through a monitor. So, while the size of your monitor is important for being able to hear your mix accurately, there are many other variables that can cause your sound to not be as clear as you need it.
Acoustics
Monitors are great for hearing your mixes accurately, but the room that you are using can play a huge role in how clearly you hear it. Considering the size of your room is important, but you should also consider investing in some basic acoustic treatment. That way, you get the most out of your studio monitor.
Wattage
The wattage of monitors can vary depending on how much you need. Basically, the more power that you have, the more clean the sound will be. Higher wattages are recommended for people who will be using a lot of lower sounds as it helps them come through much cleaner. The more wattage you get, the more you can be sure that your monitor is providing the cleanest possible sound.
Types of Monitors
There are 3 main types of studio monitors that you can purchase based on how you will be using them. Near-field monitors are the most popular choice. They are meant to be used in close proximity to you. They should remain about 4-5 feet from you while you are mixing to ensure you get the best sound. Because you are listening so close to the monitor, there will be minimal sounds bouncing off of walls before it reaches you. Far-field and soffit-mounted monitors are used in studios, but rarely to mix. These are used more for playback at high volumes. Near-field monitors are much more popular for mixing.
Budget
With studio monitors, it’s hard to make a cheap version last. You get what you pay for with these, and the more expensive your monitor is, the more wattage and quality you get. There is nothing wrong with starting out cheaper as you get started mixing, but remember that you will eventually need to upgrade your monitor. You should consider the maximum budget for a new monitor and make sure that you are getting one with enough power for mixing.
Overall, the most important factor for choosing your new monitor is to ensure it has enough power to perform properly for you. So, check the wattage and make sure you get the correct type for your individual needs, and you will be hearing your own mixes clearly in no time.
Recommended White Studio Monitors
Disclosure: This post contains affiliate links, meaning I may get a commission if you make a purchase through my links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
1) White KEF LS50
Even with its small design, the LS50 monitor produces a loaded quality sound that is unexpected of its size.
This speaker utilizes Uni-Q drivers that are high-end, which allows the equipment to cover a large sweet spot area while delivering a pure sound. This device doesn’t modify the original sound even a bit- making it produce a very precise sound.
To lessen the disturbance released by the ports of LS50, it has been specially created with a geometrically flexible membrane.
It is straightforward to set up as it’s binding posts give way to spades, bare wires, banana plugs, etc. Its cabinet design is user-friendly as its baffle is created with a fast-acting on and off response, and a creative covering to keep its original color throughout time.
It filters both medium and high frequencies with 2,200 Hz at maximum, and it’s impedance, as stated by KEF, is 3.2 Ohms at minimum. 3.8 Ohms is the frequency of the lowest bass, and while measuring its impedance, we found out that this is its minimum. Therefore, LS50s are 6-ohm monitors.
With enough space to amplify its sound, mount your white speakers on two stable stands, and these devices will undoubtedly show you how much bass quality they have. Moreover, If these devices are placed just 30cm high, they will produce deep and robust lows. Still, if you compare LS50 to other speakers in the market, this device doesn’t go on the extremes- it always produces a balanced sound.
Pros:
- Compact yet sound covers a large area.
- Produces a clean and balanced sound.
- Right for its price.
- Saves space.
2) Yamaha HS5 Studio Speaker
Yamaha Studio Monitors are specially created with newly developed transducers that effectively transforms electrical waves to sound waves that are pleasing to the ears. The transducers feature a large coverage bandwidth that has been improved to a tweeter that is 1″- making it supply a high-quality sound.
Engineers in Yamaha have made full use of the monitor and its system with a powered HS and a subwoofer that is supplemental to different areas in which music productions are held. The speakers’ amplifiers, combined with their newly created transducers, produces high-quality sound with a flat speaker response that produces very accurate output.
HS speaker enclosures are made to eradicate unnecessary sound and improve the preciseness of the sound produced even to its limit. These are built with durable MDF that strongly attaches to the cabinet’s corners.
The system of the speaker’s port effectively minimizes unpleasant sounds by generating air vibrations internally. It can lessen noise at a maximum of 6dB and meets high standards of strict music production areas.
The monitors’ Room Control provides you with an option to weaken extremely low-end sounds that are produced when these devices are fixated in adjacent to walls. Plus, it has High Trims that allow modulation of response from high-frequency sounds.
These speakers can work with any source such as keyboards, interfaces, and mixers. The High Cut control places the HS8S subwoofer to a frequency cut-off at 120 Hz maximum for inputs. For outputs, on the other hand, the Phase switch controls the subwoofer. Both Low cut controls and switch allows modulation of frequencies for low outputs that are at a range of 80Hz to 120 Hz.
It has a white version that can be aesthetically used for different sound production rooms.
Pros:
- Easily modulated sound with its switches and controls.
- Right for its price.
- Produces accurate sound.
3) KRK RP5G3W-NA Rokit 5 (Pair)
This brand offers you monitors that are in pairs at a reasonable price while giving you twice its quality. The device’s flat response is maximized up to 35kHz with a tweeter that delivers the purest possible sound. This paired equipment produces undistorted sound with its patented technology.
With this brand, you will get high standard performances from their devices, especially this pair. Moreover, they are made up of a 5″ lightweight glass that supplements their flat response even more.
This pair of speakers are created for professionals who have passions for playbacks, recordings, mixings, and etc. Plus, it has controls for high-frequency depending on your type of music.
Pros:
- A pair of monitors at the right price.
- Good bass sound quality.
- Distortion is at minimum.
- Produces a clear and loud enough sound.
Cons:
- Quickly out of stock.
- Cosmetic issues.
4) Rockville APM5W 5.25″ 2-Way 250W (Pair)
PM5W features amplifiers that are Frequency Specific. Its Cabinets are built from the best quality wood which is MDF. It is 0.5″ thick, and the boat at the front is 1″ thick to offer you the highest sound quality.
The surface of the wood is painted with baking paint that undoubtedly will last for a long time. The speakers are creatively finished with a touch of matte and a bit of brightness. In fact, the designers carefully thought of the colors for them to add beauty and elegance to any room or studio they are placed in.
The cabinets are constructed with enough space to optimize the sound the speakers produce. The ports effectively enhance the monitors sound. It has an indicator if the LED power is on located at the back panel. Moreover, each has a ¾” voice coil Tweeter diameter and an anterior dome bezel design that takes away sound distortions.
Before every speaker is sent out, it undergoes a test, a Sound Check that is generated by a computer for it to meet the expected Standards and follow the Product Specifications.
The cable that connects the monitors together rejects noise. Plus, the tip of the cable is specially made in a way that the user will not be able to plug it in reversely. The cables are locked tightly and securely for safety.
Pros:
- Good flat response.
- Affordable.
Cons:
- Wiring issues.
