The USB connected monitors receive a digital audio signal through the USB and transform it internally with the use of a digital to analog audio converter. These monitors may fall either of the two categories; the near field monitors and the far-field monitors. Near field, monitors are the ones being near to your ear, which is perfect for home use. The monitor speakers are being used in mixing and mastering tracks. While many people use headphones when mixing tracks, monitor speakers can also be used.
When choosing the size of the monitor, you need to identify the amount of space that you have. If you have restricted space, then you should work around little speakers.
The use of tiny speakers in a small spaced work area will give better results with sound blending. More prominent speakers can be used when you have an ample amount of space. The bigger ones can also be mounted on the wall, but you should carefully check on its set up to ensure that it is stable and reliable.
Ported or Closed?
Studio monitors, whether small or big, have a ported cabinet. This helps expand the frequency response lower to produce more bass. This is a beneficial feature, but ported enclosures provide sonic accuracy that is not that precise as compared with a closed cabinet. This results when the ports are located at the back of the speakers. It also happens when they are placed too close to the wall. If setting the monitors near the wall is unavoidable, then it is better to choose the front-ported or final designs so that you can achieve more precise monitoring.
You have to understand that using studio monitors is not to make the audio sound good. It is being used so that the music will be accurate and precise. An ideal set of monitors for the studio are the ones that can bring out all the details of the mix no matter if it is good or bad. It should be able to show off the precise balance within the whole frequency range.
But you have to remember that it is impossible to tell how the set of studio monitors will sound in a specific room. The acoustics of a particular place will affect your mixing even if you try or test the device in the store before purchasing it. Auditioning the set in a studio will also not help you to predict how it will sound in a room. You can take note of some characteristics, but you cannot expect it to sound the same when you use it in a different place.
When recording music, you have to consider the kind of music that you will be managing. If you are using lighter music, then you can choose the near field monitors that have 4, 5, or maybe 6-inch woofers. If you deal with the shake or the hip jumping music, then it is better to choose monitors that give more punch to achieve a sparkling sound bass.
In selecting the number of watts that your speakers should have, you should carefully consider the amount of space the room you will work on has. You will need more energy if you will be working in a bigger room as you need to convey the sound in the entirety of a particular place. Smaller studios will require a lesser amount of watts.
A good monitor speaker must have useful features like processing power, EQ, and room rectification. EQ will help the user to adjust the channels in their residential spaces. The processing ability of a speaker could either be in analog or in digital. The digital process can give excellent performance when it comes to the acoustic area. A few studio Monitor speakers have woofers, but not all. Your choice should depend on your requirements. The woofers will be vital if you are mixing sound for TV and motion as well as motion speakers. But if you are mixing the band’s show material recorded in a room, then you will need a pair of stereo.
Keep in mind that expensive does not always equate to better or best. There are studio monitors that are not expensive but give out good quality results.
But this does not mean that you should be looking for the cheaper ones as you do not have to spend big to get high-quality studio monitors that will give you the results that you want.
Recommended USB Studio Monitors
Pair Rockville APM8B
Rockville APM8B with 8″ 2-Way 500 Watt is active pair of Studio Monitor Speakers in a classic wood finish (Pair). It is a 250 Watt speaker with a two-way active monitor speaker system. It features a quad amp plan where every driver has frequency-specific separate amplifiers. The enclosure is created using high caliber MDF wood and non-particle board. This has 0.5″ in thickness with a frontal board of full 1″ in diameter to ensure that you will get the supreme sound quality.
You can get the Rockville APM8 Studio Monitor in pairs where every monitor is dual-amped. This means that there is a set-apart amp for the highs as well as for the lows. Every speaker gives out 250 watts of peak output power as well as 125 watts RMS. This gives you an overall 500 watts peak as well as 250 watts RMS per pair.
Edifier R1280T Powered Bookshelf Speaker
These speakers show off a retro look combined with a modern sense of audio quality. It can work with all kinds of devices that are with AUX and RCA connection devices. R1280T has two speakers, where one is active, and the other is a passive speaker. There are two inputs in a dynamic speaker that you can find on the back. This is where you can connect the speakers to a PC, tablet, laptop, or any device through RCA or AUX connection. You will need a 100-240V input voltage to get it working. Its built-in tone control will allow you to change the bass as well as treble from -6 to +6 dB. Together with the speakers, you will also have one speaker cable, RCA to RCA cable, AUX to RCA cable, and the remote control.
Rockville APM5B 5.25" 2-Way 250W
The Rockville APM5B 5.25″ 2-Way 250 Watt Powered USB Monitor Speakers comes in elegant Black (Pair). It has 125 Watt RMS with a dual-way active monitor speaker method. Its quad amp plan features frequency specific stand-alone amplifiers for every driver.
You also get to enjoy features like volume control and bass or treble control. This enables you to control the low and high sound frequency. It also has 1/4″ and XLR combo input jack with a high-speed USB jack and RCA input with 3.5mm headphone output.
It is a complete range “D” class amplifier circuitry that comes with an automatic switching supply of power. It features a control on Signal in LED on the rear panel. It is Ferrofluid improved 3/4″ Neodymium Dome for the tweeter that has metal grill covering. The tweeter has 3/4″ of the voice coil in diameter.
Behringer Studio 50USB 150W
Behringer Studio 50USB (150W) is a USB Studio Monitor that is considered to be one of the top-grade USB sound speakers around. It is because it has a full determination silk-vault tweeter that gives you excellent sound propagation.
It features a 150W computerized speaker with a 5″ long-throw woofer for better bass-response. This provides a focus on the non-hazardous free cone for an adequate metal reaction. This studio monitor is the best to use for PC studios, sight and sound areas, home theatre, and sound. Its USB port can be extremely fragile to information origins, and its interface is excellent.
Also, the USB may be used when connecting the speaker monitor to basic XLR and TRS connectors. This will give you excellent quality sound.
Its tweeter has a precise recurrence reaction. The current wave technology will give acoustic scattering prompt that great excellent spot. You may make more adjustments on the stretch control from the volume put together with the tweeter to create various acoustic settings. You can expect durability and longer life because it is made of suitable quality materials.