You will make good use of the information about it after learning how to string guitar string when there is a dire need of changing your guitar’s old strings with the new ones. Imagine that you need to get rid of all the strings, but you do not have knowledge about even taking out one of them.
It is an important task for every type of guitar player to take care of the strings of their guitar, no matter if the guitar that they are playing is electric, or classic. You are going to let your money stay in your pocket because it would cost you to find someone else handle this for you. The cost for having someone do it is minimal though and the main reason for learning the technique of guitar string replacement is the time. Imagine that your guitar’s strings have broken up just before a gig and there is no one else that can help you out on putting a new string on your guitar.
Learning the technique to change the strings on your guitar is not enough to make them sound correct. You will also need to know how you can tune them so that your guitar does not sound without some minimal harmony. It is common amongst guitar players to tune their guitar every time they replace a string from their guitar, to that it is certain that your guitar has not lost any sound quality after the replacement. You also need to do it because it will make sure that your guitar is giving you the sound that you are expecting.
Table of Contents
- Tools For The String Replacement Process
- Choosing The Suitable Type of Guitar String
- Things You Must Know Before Restring Your Guitar
- Part 1) How To Remove the Old Guitar Strings
- Part 2) How To Put On The Guitar Strings
- Changing The Strings of An Acoustic Guitar
- How To Restring The Nylon-string Classical Guitar
- How To Put On String To An Electric Guitar
Tools For The String Replacement Process
What are the tools that you need most when you are trying to put some new strings on your guitar? Obviously, it can be done by hand also, but these tools would ease up your way quite a bit, so I suggest that you check them out.
- Wire snip tool
- Plier Tool
- Clean cloth for polishing
- A bottle of guitar polish
- String winder tool
- String Cutter
- The string(s) that you will put on your guitar.
Choosing The Suitable Type of Guitar String
The types of strings used for guitars vary widely.
Types of Acoustic Guitar String:
- Nylon String
- Bronze String
- Phosphor Bronze String
Types of Electric Guitar String:
- Nickel Plated
- Pure Nickel
- Stainless Steel
Things You Must Know Before Restring Your Guitar
Some of the strings will be old; some will be cheap or other strings may be new. The first thing that is needed for changing the string of your guitar will be putting a little bit of slack on the previous string. Then you can be able to get the string away from the peg as well as the bridge. Then you can get rid of your old string.
Before connecting your string to the guitar’s bridge, you can do well to polish your guitar’s surface. Also, do not forget to tune your guitar to make it sound perfect.
Do not underestimate the power of learning how to restring your guitar, because it will be handy when there is a dire need to do it.
Part 1) How To Remove the Old Guitar Strings
Step1: Loosen the strings with the winder tool.
Step 2: Cut the strings with the string cutter and remove them carefully. Place your hand over the strings when cutting it. It’s to prevent the string from bouncing back and popping your eye.
Step 3: Remove the strings from the bridge and unwind the other end from the tuners.
Part 2) How To Put On The Guitar Strings
If the information of how to put on a guitar string is so new to you, then the process of renewing your guitar strings may become a real trouble for you. In reality, the application of it is extremely simple, and you should get used to this operation as a guitar maintenance routine.
Changing The Strings of An Acoustic Guitar
Step 4: Get a new of guitar strings. Normally, a string color chart is included in the string packs for your reference to match and identify the correct strings in order.
Step 5: For starting, you are going to bend the string’s ball slightly and place the string inside the hole of the bridge. Some of the guitars which have steel strings do not include pins in their construction. If you own a guitar like that, then ignore the pin issue and put the end of your string inside the hole.
Step 6: The strings must be lined up with all of the grooves inside the pin. After this is done, insert your pin into its hole and make sure that the setup is secure.
Step 7: The time has come to deal with the other end of the string and put into the capstan’s hole.
• Now gently pull your string but do not forget to leave an acceptable amount of it across the bridge and the capstan.
• To keep your string secure, bend it where it is entering the capstan.
Step 8: Use your left hand to turn the key and do not forget to protect your eyes. It is going to be much easier for you to employ the string winder after you start doing that. Do not forget to cut the remaining string for your safety. It is a good tip to do the cutting after you are done with all of the strings.
Step 9: The next part of putting on a guitar string is applying some force to the string with your hand to place it properly while you are winding. Do not wind the string in the wrong direction. The bass strings should be winded counter-clockwise whereas the treble strings must be winded in the clockwise direction.
Step 10: Continue the winding process of all of the remaining strings and do not pay attention to tuning the strings yet.
Step 11: Get rid of all of the excess parts of the strings.
How To Restring The Nylon-string Classical Guitar
Step 1: The first step of how to put on a guitar string to a classic guitar is putting the string inside the hole below the bridge.
Step 2: The string must go inside at a length of three inches.
Step 3: Pull the string up to the tie block and try to tie the string by passing it under itself at the point where it entered.
Step 4: Let the string get into the tie block again and make a strong tie of the string around itself which looks like an eight type.
Step 5: Now take the other end of the string and put it through the hole on the capstan.
Step 6: Secure the string in place by wrapping it around the back and then itself.
Step 7: This part of how to put on a guitar string is quite similar to the one that is described above. Do not forget to form a tension on the string while you are turning the key. Continue turning the key and providing tension until the slack is taken inside. The classical guitar strings are winded clockwise no matter whether it is a bass string or treble string.
• Do not let the string bend across the capstan and the neck. Try to keep it as straight as possible.
Step 8: After putting classical guitar strings onto the guitar, usually there remains no excess string, but if you happen to get some, then cut it from your guitar.
How To Put On String To An Electric Guitar
The procedure is the same as it is mentioned for the acoustic guitar. Hopefully, this article will help someone out there who has a hard time trying to change his guitar strings. If you can properly learn how to put on a guitar string, then your instrument’s sound will be as quality as the day you bought it for years to come.